In the bathroom, taps is also very important, so we can't ignore the faucet maintenance work.

1. every other month or so, use car wax to clean faucet, small hole plating layer surface can be sealed to avoid moisture or corrosive gases but ran.

2. it can be coated with a little toothpaste with a soft cloth to clean the surface of the faucet, then rinse with clean water. Do not use alkaline cleaning agents or steel wool to wipe, avoiding electroplated surface damage.

3. in the process of using a single-handle faucet, opening and closing movements are not too fast; in addition, double handle Mixer not to close a too, otherwise it will make the stop cock off, leads to water, and cannot turn off switch.

4. at faucet outlet foaming device, often due to water quality problems, small or unstable conditions, it may be because foam debris blocked, you can twist the issue bubbling water or used for needles to remove debris.

5. regularly check the drainage hose and found to have crack to be replaced immediately, so that we can guarantee does not affect the service life of mixer.

In fact, after using for a while, we ought to check and clean the faucet, so as not to damage the inconvenience caused.