Water is the source of life, so we cannot do without it in our daily life. The faucet is composed of the main body, the valve core, the handle and other parts. The composition of these parts can well meet the needs of people's daily life when the water is turned on and the water is stopped. Next, we will introduce the installation steps of the faucet
Faucet installation steps
First, ask a professional installer to install it. In particular, this faucet has many small washers and small accessories. It must be installed step by step to ensure that there are no problems such as water leakage.
Second, when installing, it is best not to bump the faucet with hard objects, and do not leave cement, glue and other debris on the surface to avoid damaging the gloss of the surface coating.
Third, if a faucet is installed in a new house and the water pipe network is newly laid, there will definitely be impurities such as sand particles left in the water. Before installation, we must pay attention to remove the debris in the pipeline, and discharge the water for a long time until the water quality becomes clear before installing the faucet.
Fourth, don't use too much force when opening, it will cause damage, just turn it gently. Even a traditional faucet cannot be screwed with a lot of force. The surface of the faucet should be wiped clean after use. Do not support or use the faucet handle as an armrest.
Fifth, if the water pressure is not lower than 0.02mpa, after a period of use, if the water output decreases, or even the water heater turns off, cut off the flow of hot and cold water, and use a wrench to gently unscrew the faucet screen at the water outlet of the faucet. The net cover, clean the impurities and then install it carefully.
Through the above introduction, I believe that everyone has a certain understanding of the installation steps of faucets. The faucet manufacturer Dilich (Andy Sanitary Ware) has strict standard requirements for products, and took the lead in implementing the ISO9001:2008 quality management system standard. The products have passed the European EN817, European CE, French ACS, British WRAS, North American CUPC, Canadian CASS and other certifications. Adhere to design innovation, quality first, create unique taste of bathroom product style and life trend, add design elements such as simplicity, luxury, fashion, etc., and also bring customers a good and comfortable bathroom life enjoyment. But after buying a faucet, the maintenance of the faucet is also very important.
Part of the content of this article is organized from the network sharing, if there is any infringement, please contact the editor to delete it.